Jose Pool Plastering has been in the pool construction for more than 20 years. during this time we have set ourselves apart as the most innovative outdoor living environment designers and builders in the houston area
Pool Construction Process
We have found that the most common cause of frustration is not knowing what to expect. We hope that this guide will assist you in under
The most common cause of frustration during the construction process is not knowing what to expect. We hope the information provided will help you understand the steps necessary to build an in ground swimming pool.
After the final design has been approved by the client, a 2 dimensional scaled plan is created for engineering and made available to use for submitter to homeowners associations. Building permits are obtained from the engineered plan.
Working from the scaled plan, the finished grade is established and the outline of the pool and location of the steps and benches are marked and spray painted on the ground. The superintendent will check the layout for accuracy. The homeowner will see the placement of the pool on the property and minor adjustments can be made without too much difficulty.
Jose Pool Plastering utilizes specialized crews for each phase of the construction process, the first being the excavators.
The equipment is brought in, the pool and trenches for plumbing are dug, mounds are formed in the location of steps and the excess dirt is hauled off by dump trucks. Occasionally problem soil is encountered, such as solid rock or chalice, which requires special equipment to remove. This is referred to as a “hard dig” and additional charges may result. The homeowner is notified if a hard dig is necessary.
PVC pipe and conduit are installed and connected to the new pool equipment which is placed on a concrete pad by the plumbing crew. The entire system is pressurized and checked for leaks and repairs are made if necessary.
Electricians will install niches and electrical conduit for the underwater lighting. They are also responsible for bonding all metal within 5’ of the water’s edge by connecting a copper wire. This is similar to grounding.
At this point, pre-gunite inspections are scheduled and upon approval, the pool is ready for the shotcrete crew to be scheduled.
Gunite or shotcrete is pneumatically sprayed filling all of the voids to form the shell of the pool, then troweled to a smooth finish. This process is completed in a single day. The following day, the homeowner must spray the shotcrete thoroughly with water 2-3 times per day for 1 week. This ensures the concrete will cure properly and reach full strength integrity. It is normal for water to collect at the bottom of the pool while curing.
The wet cement must not be walked on for at least 24 hours and children and pets should be kept clear of the area for at least 36 hours. The concrete is allowed to cure for approximately 1 week before the spray deck material is applied. Clean up around the pool and yard are completed.
Codes have been enacted to prevent children unsupervised access to the pool area. These safety barriers are required which is the homeowner’s responsibility.
The plaster crew applies a 1/2 “ thick layer of finish material that adheres to the shotcrete surface and trowels it smooth. Immediately following plaster, water begins filling the pool. The pool can take 24-48 hours to fill and the water is not to be turned off (or moved to the spa) until it reaches halfway up the waterline tile. Once the pool is full, a superintendent will start up the equipment.
A walk through of the property and an orientation of the equipment are performed with the homeowner and a superintendent and then you’re ready to start enjoying your new pool!!
The finishing touches to your pool are the most important
Tile
We replace old or damaged tiles with new tile, ceramic or glass tiles can give your pool a nice look. Tiling offer specialist pool tiling from Mosaics in any color to standard swimming pool tiles with lane markers, anti-slip pool surround tiles.
Coping
Also we offer the finest selection of perimeter pool tile and coping. Whether your taste runs to the traditional of brick or the look of poured concrete that can be stamped, stained, acid etched we can do it! We use stones such as Oklahoma stone, travertine stone, precast.
Pool Acid Washing
Also called a drain & clean, an acid wash becomes necessary if the pool has turned into the "black lagoon". This may occur if the winterizing process is not done properly, or if the pool has been stagnant for a period of time so that algae has taken over.
How To Clean Pool Tile
Are you looking for ways on how to clean pool tile using muriatic acid, vinegar, baking soda or other methods? If so, this post should help clarify the best pool tile cleaning methods for removing calcium deposits out there and descriptions of each method.
Owning a pool means that you will want to keep the pool clean during the summer as well as all other seasons. As hard as you try to keep it clean, it can start to collect dirt, algae and various types of debris.
So, it is important that you spend time to clean the pool tile so that you can avoid dirt build up.
Best Pool Tile Cleaning Methods
Before you start cleaning your pool tile you need to know the best types of products that you need to use to clean your pool tile:
Using Chemicals Like Muriatic Acid
If you are looking for a good option for cleaning your pool tiles, then cleaning chemicals that are available at a pool store will be the solution to your problem. These are the types of chemicals that will come in various varieties, but they will be affordable. You should let the pool professionals help guide you on what type of product you need to understand the chemicals needed to remove the dirt build up on the tiles. There are different home remedies for the grout that are easy make and won’t harm your pool like vinegar and baking soda. If your tiles are really dirty, then going out and purchasing chemicals are going to be the best and give the best results. These products will be strong, and you should take precautions and wear protective glasses and gear.Glass Bead Blasting:
This happens to be a method that uses a stream of round glass beads that are about as big as tip of a needle to clean the grit, oil, to remove calcium from pool tiles. Because the beads happen to be round, you can clean your tiles easily without having to worry about the tiles being scratched. .Salt Blasting:
Salt blasting uses a natural mineral salt called Kieserite which is similar to Epsom salt and it is used at low pressures. Whenever the salt comes in contact with the surface of the pool, it will burst, and this releases the dirt that is built up on the tiles. It works great on ceramic, sand stone, and many more. It is also bio-degradable, and it does have a neutral pH. Many pool owners believe it is a safe way to clean the grout from the tiles and leaves the pool good as new.Scrub the Dirt from the Tiles:
If you don’t feel like doing all the hard work, then scrubbing the tiles with special equipment is a good way to clean the pool tiles. Pool cleaning equipment such as scrubbing brushes will not be as effective at removing the dirt build up on the pool. So, it is best that you visit a pool professional when it comes to what is out there. There are various scrubbing blocks that come in a variety of materials and are chemical free as well as non-toxic. These products can be recycled and used in cleaning other areas of your home such as your toilets, bathrooms, and spas.Tile Scrubbing:
To be honest, each cleaning method will have pros and cons for your pool. The pros have really outweighed the cons. Cleaning as well as maintaining the pool properly will seem like a hassle, but these methods can help to restore your pool to its original condition in a single day.If you do not feel confident enough to use the methods that are listed, then simply hire a professional: Jose's Pool Plastering is your company.